This evening's progress
Oct. 10th, 2011 10:36 pm![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
johnridleyHotend final assembly complete. Mated with groovemount and plastidrive and mounted on X carriage. X carriage wiring complete using 3 feet of CAT5 cable (had to sacrifice a 6' jumper since my 1000' spool is solid core).
All three endstops in place
Printed an extruder motor strain relief and used it.
Z axis motors wired to terminal block
Decided on a connector to use for motor disconnect (at the motor).
All three endstops in place
Printed an extruder motor strain relief and used it.
Z axis motors wired to terminal block
Decided on a connector to use for motor disconnect (at the motor).
