![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
Just into today's ride to work, I couldn't get my right foot positioned correctly on the pedal (I'm using platforms and hunting boots until it warms up a bit). My heel kept hitting the chainstay, and it felt like I had a chunk of ice stuck to my boot. About halfway to work it got ridiculous, and I stopped to check it out; the pedal had stripped and worn the crankarm hole out; I could wobble the crank around and pull it out by hand.
I turned around to go home (5 miles home beats 15 miles to work and back) and got about 1/4 mile before the pedal fell out, not to be replaced.
4 miles over hills with one pedal isn't much fun, but at least it's way faster than walking.
Then I made a mistake with the crank puller tool and stripped the threads on the puller socket. I called the shop and he said to just bring it in and he'd get it off somehow. J suggested using a dremel tool which is what I'd probably do if I had to do it, but I have to get to the shop to get the crank replaced anyway, so I think I'll just let them do this one.
I'm sure the threads got wrecked when I changed the Shimano clipless pedals out last week for the PowerGrips; I had to use a big wrench and stand on it to get the old pedals out. I probably should have used a torch and heated the crank first to expand the aluminum a bit, since I was turning the pedals out in about 5*F weather. For sure I'm putting anti-seize compound on the thing for the new crank.
I turned around to go home (5 miles home beats 15 miles to work and back) and got about 1/4 mile before the pedal fell out, not to be replaced.
4 miles over hills with one pedal isn't much fun, but at least it's way faster than walking.
Then I made a mistake with the crank puller tool and stripped the threads on the puller socket. I called the shop and he said to just bring it in and he'd get it off somehow. J suggested using a dremel tool which is what I'd probably do if I had to do it, but I have to get to the shop to get the crank replaced anyway, so I think I'll just let them do this one.
I'm sure the threads got wrecked when I changed the Shimano clipless pedals out last week for the PowerGrips; I had to use a big wrench and stand on it to get the old pedals out. I probably should have used a torch and heated the crank first to expand the aluminum a bit, since I was turning the pedals out in about 5*F weather. For sure I'm putting anti-seize compound on the thing for the new crank.
